Open Library - открытая библиотека учебной информации

Открытая библиотека для школьников и студентов. Лекции, конспекты и учебные материалы по всем научным направлениям.

Категории

Строительство A WARNING
просмотров - 341

NOTE

NOTE

NOTE

Steering Stem

STEERING

• Install the oil seals [A] and tapered roller bearing inner races [B] to the upper and lower head pipe.

• Install the stem through the head pipe, and hand tighten the stem nut [C].

Torque -Steering Stem Nut: 4.9 N·m (0.50 kgf·m, 43 in·lb, for reference)

OInstall the steering stem nut so that the recess side [D] faces down.

• Install the front fork (see Front Fork Installation in the Sus­ pension chapter).

OTighten the fork upper champ bolts first, next the stem head bolt, last the fork lower clamp bolts.

Torque - Front Fork Upper Clamp Allen Bolts: 25 N·m (2.5 kgf·m, 18 ft·lb) Steering Stem Head Nut: 39 N·m (4.0 kgf·m, 29

ft·lb) Front Fork Lower Clamp Bolts: 23 N·m (2.3 kgf·m, 16.5 ft·lb)

OTighten the two clamp bolts alternately two times to en­sure even tightening torque.

• Install:

Front Wheel (see Front Wheel Installation in the Wheels/Tires chapter)

• Check and adjust the following items after installation.

Steering

Throttle Cables (see Throttle Cable Inspection in the Pe­riodic Maintenance chapter) Choke Cable

Headlight Aim (see Headlight Aiming Inspection in the Periodic Maintenance chapter) Rear View Mirrors Check the front brake effectiveness.


Читайте также


  • - A WARNING

    Fuel Tank Be sure to install the plug in the drain hose after draining. Oil could drain from the open hose and get on the tires which could cause an accident and injury. Топливная система3-21Fuel Tank RemovalGasoline is extremely flammable and can be ex­plosive under certain conditions. Turn the ignition switch OFF. Do not smoke. Make sure the area is well-ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light. ... [читать подробенее]


  • - A WARNING

    NOTE NOTE NOTE Steering Stem STEERING • Install the oil seals [A] and tapered roller bearing inner races [B] to the upper and lower head pipe. • Install the stem through the head pipe, and hand tighten the stem nut [C]. Torque -Steering Stem Nut: 4.9 N·m (0.50 kgf·m, 43 in·lb, for reference)OInstall the steering stem nut so that the recess side [D] faces down. • Install the front fork (see Front Fork Installation in the Sus­ pension... [читать подробенее]