Open Library - открытая библиотека учебной информации

Открытая библиотека для школьников и студентов. Лекции, конспекты и учебные материалы по всем научным направлениям.

Категории

Строительство ENGINE LUBRICATION SYSTEM
просмотров - 176

NOTE

Do not over apply a non-permanent locking agent to the threads. This may block the oil passage.

ENGINE LUBRICATION SYSTEM 7-11 Oil Pan and Relief Valve

Relief Valve Installation

• Apply a non-permanent locking agent to the threads of the relief valve, and tighten it.

Torque - Relief Valve: 15 N·m (1.5 kgf·m, 11 ft·lb) CAUTION

• Install the oil pan.

Torque-Oil Pan Mounting Bolts: 11 N·m (1.1 kgf·m, 95 in·lb)

Relief Valve Inspection

• Remove the relief valve.

• Check to see if the steel ball inside the valve slides smoothly when pushing it in with a wooden or other soft rod, and see if it comes back to its seat by valve spring pressure.

OInspect the valve in its assembled state. Disassembly and assembly may change the valve performance.

• If any rough spots are found during above inspection, wash the valve clean in a high flash-point solvent and blow out any foreign particles that may be in the valve with compressed air.

Valve

Spring

Clean the parts in a well-ventilated area, and take care that there is no spark or flame anywhere near the working area. Because of the danger of highly flammable liquids, do not use gasoline or low flash -point solvents.

If cleaning does not solve the problem, replace the relief valve as an assembly. The relief valve is precision made with no allowance for replacement of individual parts.


Читайте также


  • - ENGINE LUBRICATION SYSTEM 7-5 Exploded View

    Exploded View ENGINE LUBRICATION SYSTEM Exploded View ENGINE LUBRICATION SYSTEM 7-3 Exploded View ENGINE LUBRICATION SYSTEM No. Fastener Torque Remarks N-m kgf-m ft-lb Oil Filler Plug 1.5 0.15 13 in·lb   Main Oil Pipe Mounting Bolt 1.1 95 in·lb   Main Oil Pipe Upper Banjo Bolt 1.2 104 in·lb   Main... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM 7-15

    NOTE Oil Pump ENGINE LUBRICATION SYSTEM • Pull the pin [A] out of the pump shaft. • Pull the oil pump shaft [B] out of the body. Remove the washer. Oil Pump Assembly • Assembly of the oil pump is the reverse of disassembly. • Before installing the oil pump, be sure the shaft and rotors turn freely. Oil Screen Cleaning and Inspection н WARNING Clean the screen in a well-ventilated area, and take care that there is no spark or... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM

    NOTE Do not over apply a non-permanent locking agent to the threads. This may block the oil passage. ENGINE LUBRICATION SYSTEM 7-11 Oil Pan and Relief Valve Relief Valve Installation • Apply a non-permanent locking agent to the threads of the relief valve, and tighten it. Torque - Relief Valve: 15 N·m (1.5 kgf·m, 11 ft·lb) CAUTION• Install the oil pan. Torque-Oil Pan Mounting Bolts: 11 N·m (1.1 kgf·m, 95 in·lb) Relief Valve Inspection • Remove the relief... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM 7-5 Exploded View

    Exploded View ENGINE LUBRICATION SYSTEM Exploded View ENGINE LUBRICATION SYSTEM 7-3 Exploded View ENGINE LUBRICATION SYSTEM No. Fastener Torque Remarks N-m kgf-m ft-lb Oil Filler Plug 1.5 0.15 13 in·lb   Main Oil Pipe Mounting Bolt 1.1 95 in·lb   Main Oil Pipe Upper Banjo Bolt 1.2 104 in·lb   Main... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM 7-15

    NOTE Oil Pump ENGINE LUBRICATION SYSTEM • Pull the pin [A] out of the pump shaft. • Pull the oil pump shaft [B] out of the body. Remove the washer. Oil Pump Assembly • Assembly of the oil pump is the reverse of disassembly. • Before installing the oil pump, be sure the shaft and rotors turn freely. Oil Screen Cleaning and Inspection н WARNING Clean the screen in a well-ventilated area, and take care that there is no spark or... [читать подробенее]