Open Library - открытая библиотека учебной информации

Открытая библиотека для школьников и студентов. Лекции, конспекты и учебные материалы по всем научным направлениям.

Категории

Строительство ENGINE LUBRICATION SYSTEM 7-15
просмотров - 182

NOTE

Oil Pump

ENGINE LUBRICATION SYSTEM

• Pull the pin [A] out of the pump shaft.

• Pull the oil pump shaft [B] out of the body. Remove the washer.

Oil Pump Assembly

• Assembly of the oil pump is the reverse of disassembly.

• Before installing the oil pump, be sure the shaft and rotors turn freely.

Oil Screen Cleaning and Inspection

н
WARNING
Clean the screen in a well-ventilated area, and take care that there is no spark or flame anywhere near the working area. Because of the danger of highly flammable liquids, do not use gasoline or low flash point solvents.

• Clean the oil pump screen with high flash-point solvent and remove any particles stuck to it.

ОWhile cleaning the screen, check for any metal particles that might indicate internal engine damage.

• Check the screen carefully for any damage: holes and broken wires.

• If the screen is damaged, replace the oil screen assembly.


Читайте также


  • - ENGINE LUBRICATION SYSTEM 7-5 Exploded View

    Exploded View ENGINE LUBRICATION SYSTEM Exploded View ENGINE LUBRICATION SYSTEM 7-3 Exploded View ENGINE LUBRICATION SYSTEM No. Fastener Torque Remarks N-m kgf-m ft-lb Oil Filler Plug 1.5 0.15 13 in·lb   Main Oil Pipe Mounting Bolt 1.1 95 in·lb   Main Oil Pipe Upper Banjo Bolt 1.2 104 in·lb   Main... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM 7-15

    NOTE Oil Pump ENGINE LUBRICATION SYSTEM • Pull the pin [A] out of the pump shaft. • Pull the oil pump shaft [B] out of the body. Remove the washer. Oil Pump Assembly • Assembly of the oil pump is the reverse of disassembly. • Before installing the oil pump, be sure the shaft and rotors turn freely. Oil Screen Cleaning and Inspection н WARNING Clean the screen in a well-ventilated area, and take care that there is no spark or... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM

    NOTE Do not over apply a non-permanent locking agent to the threads. This may block the oil passage. ENGINE LUBRICATION SYSTEM 7-11 Oil Pan and Relief Valve Relief Valve Installation • Apply a non-permanent locking agent to the threads of the relief valve, and tighten it. Torque - Relief Valve: 15 N·m (1.5 kgf·m, 11 ft·lb) CAUTION• Install the oil pan. Torque-Oil Pan Mounting Bolts: 11 N·m (1.1 kgf·m, 95 in·lb) Relief Valve Inspection • Remove the relief... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM 7-5 Exploded View

    Exploded View ENGINE LUBRICATION SYSTEM Exploded View ENGINE LUBRICATION SYSTEM 7-3 Exploded View ENGINE LUBRICATION SYSTEM No. Fastener Torque Remarks N-m kgf-m ft-lb Oil Filler Plug 1.5 0.15 13 in·lb   Main Oil Pipe Mounting Bolt 1.1 95 in·lb   Main Oil Pipe Upper Banjo Bolt 1.2 104 in·lb   Main... [читать подробенее]


  • - ENGINE LUBRICATION SYSTEM 7-15

    NOTE Oil Pump ENGINE LUBRICATION SYSTEM • Pull the pin [A] out of the pump shaft. • Pull the oil pump shaft [B] out of the body. Remove the washer. Oil Pump Assembly • Assembly of the oil pump is the reverse of disassembly. • Before installing the oil pump, be sure the shaft and rotors turn freely. Oil Screen Cleaning and Inspection н WARNING Clean the screen in a well-ventilated area, and take care that there is no spark or... [читать подробенее]