Open Library - открытая библиотека учебной информации

Открытая библиотека для школьников и студентов. Лекции, конспекты и учебные материалы по всем научным направлениям.

Категории

Строительство Spring Preload Adjustment
просмотров - 372

SUSPENSION 13-13 Rear Shock Absorber

Spring Preload Adjustment

The spring preload adjuster on the rear shock absorber has 5 positions so that the spring tension can be adjusted for different road and loading conditions.

• Using the hook wrench [A], turn the adjuster to adjust the spring tension.

Spacial Tool - Hook Wrench: 57001-1101

OThe standard adjuster position for an average-build rider of 68 kg (150 lb) with no passenger and no accessories is 2nd step from the weakest position.

If the spring action feels too soft or too stiff, adjust it in accordance with the following table.

Position Spring Force Setting Load Road Speed
Strong t¦ 4Weak Soft t¦ 4Hard Light t¦ 1Heavy Good t¦ 1Bad Low t¦ 1High

Rear Shock Absorber Removal

• Squeeze the brake lever slowly and hold it with a band [A].

• Set the jack under the engine and raise the rear wheel.

Special Tool - Jack: 57001-1238

• Remove the seat (see Seat Removal in the Frame chap­ter).

• Remove the Side Covers (see Side Cover Removal in the Frame chapter).

• Remove the upper tie-rod bolt [A] and nut.

• Remove the mounting bolts [B] and pull off the rear shock absorber [C].


Читайте также


  • - Spring Preload Adjustment

    SUSPENSION 13-13 Rear Shock Absorber Spring Preload Adjustment The spring preload adjuster on the rear shock absorber has 5 positions so that the spring tension can be adjusted for different road and loading conditions. • Using the hook wrench [A], turn the adjuster to adjust the spring tension. Spacial Tool - Hook Wrench: 57001-1101 OThe standard adjuster position for an average-build rider of 68 kg (150 lb) with no passenger and no accessories is 2nd step from the... [читать подробенее]


  • - Spring Preload Adjustment

    SUSPENSION 13-13 Rear Shock Absorber Spring Preload Adjustment The spring preload adjuster on the rear shock absorber has 5 positions so that the spring tension can be adjusted for different road and loading conditions. • Using the hook wrench [A], turn the adjuster to adjust the spring tension. Spacial Tool - Hook Wrench: 57001-1101 OThe standard adjuster position for an average-build rider of 68 kg (150 lb) with no passenger and no accessories is 2nd step from the... [читать подробенее]