Категории
Образование
Align the plain washer notch and master cylinder edge for assembly. просмотров - 520
Facing upward.
MASTER CYLINDER INSTALLATION
1. Install:
• Master cylinder Ø
2• Master cylinder bracket Ø
10 Nm (1.0 m•kg)
CAUTION:
Align the end of the master cylinder with the punch mark on the handlebar, and then install the
4 master cylinder bracketØ with the “UP” mark
2. Install:
• Plain washer Ø NEW
• Brake hose Ø
• Plain washer Ø NEW
• Union bolt
3
30 Nm (3.0 m•kg)
CAUTION:
3. Air bleed:
• Brake system
Refer to ‘AIR BLEEDING’ section in CHAPTER 3.
sWARNING
Use only designated quality brake fluid; otherwi- se, the rubber seals may deteriorate, causing lea- kage and poor brake performance.
Refill with the same type of brake fluid; mixing fluids may result in a harmful chemical reaction and lead to poor performance.
Be careful that water does not enter; the signifi- cantly lower boiling point of the fluid may result in vapour lock.
4. Inspect:
• Brake operation.
Читайте также
Facing upward. MASTER CYLINDER INSTALLATION 1. Install: • Master cylinder Ø 2• Master cylinder bracket Ø 10 Nm (1.0 m•kg) CAUTION: Align the end of the master cylinder with the punch mark on the handlebar, and then install the 4 master cylinder bracketØ with the “UP” mark 2. Install: • Plain washer Ø NEW • Brake hose Ø • Plain washer Ø NEW • Union bolt 3 30 Nm (3.0 m•kg) ... [читать подробенее]