Категории
Образование
WHEEL STATIC BALANCE ADJUSTMENT просмотров - 342
FRONT WHEEL AND BRAKE DISC CHAS
J-4
FRONT WHEEL AND BRAKE DISC CHAS
Do not strike the inner race of balls of the bearing. Contact should be made only with the outer race.
Mm
Out of specification —( replace
2. Measure:
• Brake disc thickness
Brake disc thickness: 4.5 mm | |
Minimum thickness: 4 mm |
Out of specification —( replace
FRONT WHEEL ASSEMBLY
1. Install:
• Bearing Ø
• Spacer Ø
• Bearing Ø
• Oil seal
NOTE:
Apply the lithium soap base grease on the bearing and oil seal lip when installing.
Use a socket that matches the outside diameter of the race of the bearing.
Always use a new oil seal.
Install the oil seal with its manufacturer’s marks or numbers facing outward.
CAUTION:
2. Install:
• Brake disc Ø
1 NOTE:
23 Nm (2.3 m•kg)
NOTE:
After replacing the tyre and/or the rim, the wheel sta-
Tighten the bolts (brake disc) in stages using a criss- cross pattern
tic balance should be adjusted.
Adjust the front wheel static balance with the brake disc installed
Читайте также
FRONT WHEEL AND BRAKE DISC CHAS J-4 FRONT WHEEL AND BRAKE DISC CHAS Do not strike the inner race of balls of the bearing. Contact should be made only with the outer race. Mm Out of specification —( replace 2. Measure: • Brake disc thickness Brake disc thickness: 4.5 mm Minimum thickness: 4 mm Out of specification —( replace FRONT WHEEL ASSEMBLY 1. Install: • Bearing Ø •... [читать подробенее]